ANTHEM
STR
200 Watts per Channel 8 Ohms
400 Watts per Channel 4 Ohms
550 Watts per Channel 2 Ohms
30V/ms Slew Rate
330 Damping Factor 20Hz-1kHz
Anthem Room Correction
AES/EBU-S/PDIF-Opical XLR and Unbalanced Inputs
Asynchronous USB Input Supporting 32-bit 384kHz PCM and DSD 2.8/5.6 MHz
Up-sampling to 24 bit/192kHz
$5,999.99
AVM 70
15.2 Channel Pre Amp
Dolby ATMOS-DTS:X
Anthem Room Correction
Premium 32-bit/768kHz Differential Output DAC
Wi Fi and DTS Play-Fi
HDMI 2.0a-HDCP 2.2
4:4:4 Subsampling at 4K60(18.2Gbps)
BT.2020 Color Gamut
4K 50/60 Switching
$4,499.00
MCA 525 GEN 2
225 Watts per Channel 8 Ohms
400 Watts per Channel 4 ohms
600 Watts per Channel 2 Ohms
Balanced and Unbalanced Inputs
120 dB Signal to Noise Ratio
30V/ms Slew Rate
300 Damping Factor 20Hz to 1kHz
0.002% IMD at 100 Watts 60Hz- 7kHz
Rackmountable
$4,199.00
MRX 540
5 Channel
Anthem Room Correction
100 Watts per Channel
110 dB Signal to Noise Ratio
4 Speaker Profile Memory
32-bit/768 kHz Output DAC
HDMI 2.0a
HDCP 2.2
HDR-BT.2020 Color Gamut
4K 50/60 Switching
$2099.00
MRX 740
7 Channel
11.2 Pre Amp
Dolby Atmos-DTS:X
Anthem Room Correction
140 Watts per Channel
110 dB Signal to Noise Ratio
4 Speaker Memory Profile
Quad Core Digital Signal Processing
DTS Play-Fi Streaming-Wi Fi Network Connection
4K 50/60 Switching
$3299.00
MRX 1140
11 Channel
11.2 Pre Amp
Dolby Atmos-DTS:X
140 Watts per Channel
110 dB Signal to Noise Ratio
Anthem Room Correction
Wireless Network Connection
DTS Play-Fi
Quad Core Digital Signal Processing
4K 50/60 Switching
$4499.00
BRYSTON
2.5B³
135 Watts into 8 Ω
180 Watts into 4 Ω
360 Watts into 8 Ω(Bridged Mono)
Selectable Gain at 23 or 29dB
Independent Power Supplies For Each Channel
≤0.005 THD From 20Hz-20kHz at 135 Watts
115 dB Signal to Noise Ratio
>60V/µS Slew Rate
>500 at 20Hz(8Ω)
This Item Is Only Available for Sale In Store
$5,495.00
3B³
200 Watts into 8Ω
300 Watts into 4Ω
400 Watts into 8Ω(Bridged Mono)
Selectable Gain 23 and 29dB
Independent Power Supplies For each Channel
≤0.005 THD 20Hz-20kHz at 200 Watts
-113 dB Signal to Noise Ratio Balanced
>60V/µS Slew Rate
>500 Damping Factor at 20Hz(8Ω)
This Item is Only Available for Sale In Store
$6,595.00
4B³
300 Watts into 8Ω
500 Watts into 4Ω
900 Watts into 8Ω(Bridged Mono)
Selectable Gain at 23 and 29dB
Independent Power Supplies For Each Channel
≤0.005 THD 20Hz-20kHz at 300 Watts
113dB Signal to Noise Ratio Balanced
>60V/µS Slew Rate
>500 Damping Factor at 20Hz(8Ω)
This Item is Available for Sale In Store Only
$8,245.00
7B³
600 Watts into 8Ω
900 Watts into 4Ω
Selectable Gain at 23 and 29dB
Regulated Power Supplies to All Voltage Gain Stages
≤0.005 THD 20Hz-20kHz at 600 Watts
116dB Signal to Noise ratio Balanced
>60V/µS Slew Rate
>300 Damping Factor at 20Hz(8Ω)
This Item is Available For Sale In Store Only
$8,245.00
Each
14B³
600 Watts into 8Ω
900 Watts into 4Ω
Selectable Gain at 23 and 29dB
Regulated Power Supplies To All Voltage Gain Stages
≤0.005 THD 20Hz-20kHZ at 600 Watts
120dB Signal to Noise Ratio Balanced
60V/µS Slew Rate
>500 Damping Factor at 20Hz(8Ω)
This Item is Available For Sale In Store Only
$13,195.00
28B³
1000 Watts into 8Ω
2000 VA Power Supply
Selectable Gain at 23 and 29dB
Regulated Power Supply to All Gain Stages
Energy Storage Power Transformers Maximizing Dynamic Range
≤0.005 THD 20Hz-20kHz at 1000 Watts
117dB Signal to Noise Ratio Balanced 116 dB Unbalanced
>65V/µS Slew Rate
>500 Damping Factor 20Hz(8Ω)
This Item is Available For Sale In Store Only
$15,175.00
Each
CONRAD JOHNSON
CAV 45
Power
45 watts per channel RMS both channels driven into 4 ohms from 30Hz to 15kHz at no more than 1.5% total harmonic distortion or intermodulation distortion.
Small Signal Distortion
less than .1% at mid-band
Frequency Response
20Hz to 20 kHz +0/-.5 dB
Hum and Noise
100 dB below rated power output
Phase
speaker output is phase correct
Input Impedance
100 kOhms
This Item Is Only Available for Sale In Store
$5499.00
ET3
Specifications
- Gain:
25 db - Maximum output:
20 Vrms - Output impedance:
100 ohms - Distortion:
less than .15% THD at 1.0 Vrms output - Frequency response:
at unity gain
2 Hz to more than 100Khz - Hum and noise:
98 db below 2.5 v - Tube complement:
1 x 6922
This Item is Only Available for Sale In Store
$4399.00
Classic 62
Power:
CL62 & 62SE 60 Watts per channel from 30 Hz to 15 KHz at no more than 1.5 % THD, both channels driven into 4 Ohms (also available connected for 16 ohm loads)
Sensitivity:
CL62 & 62SE: 0.6 V rms to rated power
Frequency Response (at 10 Watts):
20 Hz to 20 kHz, +/- .3 dB
Hum and Noise:
96 dB below rated power
Phase:
phase correct
Input Impedance:
100 kOhms
Tube Complement:
CL62: 3 x 6922, 4 x EL34
This Item is Available for Sale In Store Only
$6399.00
ET7 S2
Specifications
- Gain:
25 db - Maximum output:
20 vrms - Output impedance:
100 ohms - Distortion:
less than .15% THD at 1.0 V - Frequency response:
2 Hz to more than 100Khz - Hum and noise:
100 db below 2.5 v - phase:
inverts phase of all inputs at main out - Tube complement:
1 x 6922
This Item is Available For Sale In Store Only Call For Availability
$15,999.00
Classic 120
Power:
CL120 &120SE: 125 Watts per channel from 30 Hz to 15 KHz at no more than 1.5 % THD, both channels driven into 4 Ohms (also available connected for 8 or 16 Ohm loads)
Sensitivity:
CL120 & 120SE: 0.9V rms to rated power
Frequency Response (at 10 Watts):
20 Hz to 20 kHz, +/- .3 dB
Hum and Noise:
96 dB below rated power
Phase:
phase correct
Input Impedance:
100 kOhms
Tube Complement:
CL120: 3 x 6922, 8 x EL34
CL120SE: 3 x 6922, 8 x KT120
This Item is Available For Sale In Store Only Call For Availability
$11,799.00
TEA2 PHONO EQUALIZATION PREAMPLIFIER
Specifications
Gain
Low Gain – 40 dB
High Gain – 55 dB
Overload
Low Gain – 175 mV
High Gain – 50 mV
Hum and Noise
Direct Inputs – 80 dB below 10 mV input
Phase
phase correct
Output Impedance
below 200 ohms
The TEA2 is available in high-gain (55 dB) and low gain (40 dB) versions to match a wide range of modern phono cartridges.
This Item is Available For Sale In Store Only Call For Availability
$5699.00
CAMBRIDGE AUDIO
Topaz AM 10
35 watts (into 8 Ohms)
1 x CD RCA input
1 x Tuner/DAB RCA input
1 x MP3/AUX RCA input
1 x MP3/AUX 3.5mm input (front panel)
1x BD/DVD RCA input
1 x Phono RCA input for Moving Magnet Cartridges
1 x Rec Out RCA output
1 x Headphone output
$399.00
TOPAZ SR10:SOLD OUT
Specifications
85W RMS into 8 Ohms (2-channels driven)
1 x CD RCA input
1 x Tuner/DAB RCA input
1 x MP3/AUX RCA input
1 x MP3/AUX 3.5mm input (front panel)
1 x BD/DVD RCA input
1 x Phono RCA input for Moving Magnet cartridges
1 x Rec Out RCA output
1 x Subwoofer Output
$549.00
Classic 62
Power:
CL62 & 62SE 60 Watts per channel from 30 Hz to 15 KHz at no more than 1.5 % THD, both channels driven into 4 Ohms (also available connected for 16 ohm loads)
Sensitivity:
CL62 & 62SE: 0.6 V rms to rated power
Frequency Response (at 10 Watts):
20 Hz to 20 kHz, +/- .3 dB
Hum and Noise:
96 dB below rated power
Phase:
phase correct
Input Impedance:
100 kOhms
Tube Complement:
CL62: 3 x 6922, 4 x EL34
This Item is Available for Sale In Store Only
$5699.00
ET7
Specifications
- Gain:
25 db - Maximum output:
20 vrms - Output impedance:
100 ohms - Distortion:
less than .15% THD at 1.0 V - Frequency response:
2 Hz to more than 100Khz - Hum and noise:
100 db below 2.5 v - phase:
inverts phase of all inputs at main out - Tube complement:
1 x 6922
This Item is Available For Sale In Store Only Call For Availability
$12,799.00
Classic 120
Power:
CL120 &120SE: 125 Watts per channel from 30 Hz to 15 KHz at no more than 1.5 % THD, both channels driven into 4 Ohms (also available connected for 8 or 16 Ohm loads)
Sensitivity:
CL120 & 120SE: 0.9V rms to rated power
Frequency Response (at 10 Watts):
20 Hz to 20 kHz, +/- .3 dB
Hum and Noise:
96 dB below rated power
Phase:
phase correct
Input Impedance:
100 kOhms
Tube Complement:
CL120: 3 x 6922, 8 x EL34
CL120SE: 3 x 6922, 8 x KT120
This Item is Available For Sale In Store Only Call For Availability
$10,799.00
TEA2 PHONO EQUALIZATION PREAMPLIFIER
Specifications
Gain
Low Gain – 40 dB
High Gain – 55 dB
Overload
Low Gain – 175 mV
High Gain – 50 mV
Hum and Noise
Direct Inputs – 80 dB below 10 mV input
Phase
phase correct
Output Impedance
below 200 ohms
The TEA2 is available in high-gain (55 dB) and low gain (40 dB) versions to match a wide range of modern phono cartridges.
This Item is Available For Sale In Store Only Call For Availability